|
|
|
|
Production programme of series HDS rollers
The roller types are divided by the different precision C3 tolerance
bearings used. To identify your roller please choose the bearing type first. Afterwards
please 'click' on the roller diameter required. You will be directly leaded to the roller
table showing the standard available roller width available.
(Example: You use rollers with a 6204 bearing and the roller diameter you are looking for is 108 mm. In this case our HDS-1 rollers are suitable to your demand and you have to 'click' on the 108 within the HDS-1 column.)
If the roller diameter required by you is not indicated in this table please follow the link to our non-standard rollers page.
Roller |
Ø |
basic |
spindle |
bearing |
note |
||||
type |
mm |
design |
s |
d |
ch |
||||
N |
3 |
20 |
14 |
6204 |
with tube and spindle in steel |
||||
The table indicates the type and diameter of standard roller in production according to European standards to DIN 15207. |
N |
3 |
25 |
18 |
6205 |
with tube and spindle in steel |
|||
Upon request rollers may be supplied with varying dimensions, tube thickness and diameters according to standards CEMA, BS, JIS, AFNOR and ISO-FEM. |
N |
3 |
25 |
18 |
6305 |
with tube and spindle in steel |
|||
N |
3 |
30 |
22 |
6206 |
with tube and spindle in steel |
||||
N |
4 |
30 |
22 |
6306 |
with tube and spindle in steel |
||||
N |
3.5 |
40 |
32 |
6308 |
with tube and spindle in steel |
If the roller size required by you cannot be found in the above-mentioned table please take a look to the non-standard table.
Webmaster: webmaster@bulk-handling.de
© Translation, reproduction and adaption rights, total and/or partial, by any means (microfilms
and phostatic copies included) are reserved to all countries.